Magpow Fast Curing Modified Acrylic Ab Adhesive Glue for Auto Spare Parts

1 / 5

Magpow Fast Curing Modified Acrylic Ab Adhesive Glue for Auto Spare Parts

Still deciding? Get samples of $ !

Request Sample

Send Inquiry

Product Description

Basic Information

Model NO.:

MPA114

Color:

Light Blue or Red Thick Liquid

Composition:

Organic Material

Morphology:

Thick Liquid

Components Rate:

A:B = 1:1

Applying Temp:

-30 to 100°C

Curing Time:

Less Than 10 Mins

Shear Strength:

≥ 10MPa (Steel-Steel)

CAS No.:

C3h8n2o

HS Code:

3506100090

Product Description

Non-Pollutive Strong Economical Epoxy Resin Glue (MPA114)

Specification: 80g / set, 100sets / CTN. Measures: 62*29*15cm.

🔴 MAIN COMPONENT

A component is the modified epoxy resin, B component is modified sulfur curing agent.

🔴 PRODUCT FEATURES

Solidifying rapidly within 5-8 mins at room temperature.
Suitable for small parts and structural strength.
Can be used after 3 hours with high adhesive performance.
Can be lacquered and waxed.
Note: Not suitable for shaking joints; joint layer is fragile.

🔴 SCOPE OF APPLICATION

Widely used for bonding hard materials: iron, casting iron, steel, aluminum, glass, pottery, graphite, concrete, etc. Ideal for household repairs, appliances, agricultural machinery, furniture, valves, and chemical piping.

🔴 USING METHOD

Clean and dry the surface (ensure no oil or wax).
Pierce seal, squeeze out evenly (A:B=1:1), and mix thoroughly.
Apply to surface and press. Achieves intensity after 3 hours at normal temperature (suggested above 10°C).

Name Of Product	Item Code	Component Rate	Setting time	Shear Strength
8 Minutes Rapid Epoxy	SK-1122	A:B=1:1	5-8 Mins	≥ 10MPa

🔴 WARNING & STORAGE

Avoid contact with eyes and skin. If contact occurs, wash with alcohol and then soap and water. Tighten caps after use; do not swap caps A and B. Store in a cool, dry place. Shelf life: 12 months.

Frequently Asked Questions

Q1: What is the mixing ratio for this epoxy adhesive? A: The mixing ratio is a strict 1:1 by volume for component A and component B.

Q2: How fast does the glue set? A: It solidifies rapidly within 5 to 8 minutes at room temperature (around 25°C).

Q3: What materials can I bond with this product? A: It is suitable for hard materials including steel, iron, aluminum, glass, ceramics, concrete, and certain plastics.

Q4: Is it resistant to vibration? A: This specific epoxy forms a fragile joint layer and is not recommended for parts subject to heavy shaking or vibration.

Q5: What is the shelf life and storage requirement? A: The shelf life is 12 months when stored in a cool, dry, and air-tight environment.

Q6: Can the bonded surface be further processed? A: Yes, once fully cured, the adhesive layer can be lacquered and waxed as needed.